Solvent based single pack floor finish

Very quick drying. Resistant to mild chemicals, water, oil and grease. Suitable for use on concrete, steel and wooden floors in light traffic areas.

Preparation : See Concrete Floor Preparation

Coverage: Approximately 12 square metres per litre depending on the nature and porosity of the surface being painted.

Colours: Medium Grey and Red

Sheen Level : Mid – Sheen

Drying Time : Touch dry in 2 hours. Recoatable after 6 hours.

NOTE : The coating must be fully cured for a minimum of 24 hours in well ventilated conditions before use.